1. Remove the trim panel. Refer to Rear Door Trim Panel Replacement .
2. Peel the water deflector away from the door. Use a soft-faced scraper if needed. Refer to Water Deflector Replacement .



3. Remove the rod that retains the actuator to the lever.
4. Remove the actuator wiring connector.
5. Remove the rivets that retain the actuator to the door.

Drill out the head of the rivet with a 5 mm (3/16 in) drill bit.

6. Remove the actuator from the door.

Tools Required

M 39010 Heavy Duty Rivet Gun

1. Install the actuator to the door.
2. Use the M 39010 in order to install the rivets that retain the actuator to the door.
3. Install the actuator wiring connector.
4. Install the actuator to the lever rod.
5. Install the water deflector. Refer to Water Deflector Replacement .
6. Install the trim panel. Refer to Rear Door Trim Panel Replacement .