- Ground pin 4 to pin 8 of the data link connector (DLC). The receiver
will respond as follows:
| • | The doors will lock and unlock within 2 seconds. |
| • | The liftgate window release (E54) will be activated within 2 seconds. |
- Simultaneously press and hold the LOCK and UNLOCK buttons on one
of the transmitters until the locks cycle. This will take approximately 10 seconds.
The receiver will respond as follows:
| • | The doors will lock and unlock within 2 seconds. |
| • | The liftgate window release (E54) will be activated within 2 seconds. |
| • | Do not wait more then 60 seconds between transmitters or the receiver
will exit the programming mode. |
- Repeat step 2 for each transmitter, up to four transmitters
can be programed to this vehicle.
- Remove the jumper wire from the DLC.
- Verify that the RKE is functioning correctly:
| • | Lock and unlock the doors. |
| • | Activate the liftgate window (E54). |
