Removal Procedure
- Remove the rubber side
 rail cap from the center support.
 
- Remove the bolts from the center supports.
 
- Remove the bolts from the end supports.
 
- Remove the luggage carrier as an assembly from the roof with an
 assistant.
 
- Remove the side rail support gaskets.
 
- Remove the screws from
 the side rail supports.
 
- Remove the side rail supports from the side rails.
 
- Remove the screws from the cross rails.
 
- Remove the cross rails from the sliders.
 
- Remove the screws from the sliders and the lock plates.
 
- Remove the sliders from the slots in the side rails.
 
Installation Procedure
- Install the sliders into
 the slots in the side rails.
 
- Install the screws into the sliders and the lock plates.
 
- Install the cross rails onto the sliders.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws  to the cross rails.
 
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the side rail supports to the side rails.
 
- Install the screws to the side rail supports.
 
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the side rail support gaskets to the roof.
 
- Install the luggage carrier as an assembly onto the roof with
 an assistant.
 
- Install the screws to the end supports.
 
Tighten
Tighten the screws to 3 N·m (27 lb in).
- Install the screws into the center supports.
 
Tighten
Tighten the screws to 3 N·m (27 lb in).
- Install the rubber side rail cap onto the center support.