Put the steering column in the NEUTRAL position.
2.1. | Pull out the tab (1) on the adjuster block side (2) of the electrical automatic transmission shift lock control actuator. |
2.2. | Press on the adjuster block (2) to disengage the adjuster teeth. Slide the adjuster block (2) as far away from the actuator as possible. |
2.3. | Lock the adjuster block in place by pushing inward on the tab (1). |
3.1. | The automatic transmission shift lock control actuator must lock the shift lever clevis when the shift lever clevis is put into the PARK position. |
3.2. | Turn the ignition to the ON position and depress the brake pedal in order to move the gear shift lever out of the PARK position. The actuator will be energized. |
3.3. | Readjust the automatic transmission shift lock control actuator if needed. |
3.4. | Install the lower steering column trim cover. Refer to Steering Column Trim Covers Replacement - On Vehicle . |
3.5. | Enable the SIR system. Refer to Enabling the SIR System . |