| Table 1: | Engine Oil Pressure (EOP) Sensor Connector |
| Table 2: | Fuel Pump and Sender Assembly Connector |
| Table 3: | Instrument Panel Cluster (IPC) Connector |
| |||||||
|---|---|---|---|---|---|---|---|
Connector Part Information |
| ||||||
Pin | Wire Color | Circuit No. | Function | ||||
A | TAN/WHT | 331 | Oil Pressure Sensor Signal | ||||
| |||||||
|---|---|---|---|---|---|---|---|
Connector Part Information |
| ||||||
Pin | Wire Color | Circuit No. | Function | ||||
A | PPL | 1589 | Fuel Level Sensor Signal | ||||
B | GRY | 120 | Fuel Pump Supply Voltage | ||||
C | BLK | 1650 | Ground | ||||
D | BLK | 2759 | Low Reference | ||||
| |||||||
|---|---|---|---|---|---|---|---|
Connector Part Information |
| ||||||
Pin | Wire Color | Circuit No. | Function | ||||
A1 | BRN/WHT | 419 | MIL Control | ||||
A2 | -- | -- | Not Used | ||||
A3 | BLK | 750 | Ground | ||||
A4 | DK BLU | 15 | Right Turn Signal Lamps Supply Voltage | ||||
A5 | GRY | 8 | Instrument Panel Lamp Supply Voltage - 1 | ||||
A6-A7 | -- | -- | Not Used | ||||
A8 | PNK | 39 | Ignition 1 Voltage | ||||
A9-A10 | -- | -- | Not Used | ||||
A11 | LT BLU | 14 | Left Turn Signal Lamps Supply Voltage | ||||
B1 | PNK | 1020 | Off/Run/Crank Voltage | ||||
B2 | -- | -- | Not Used | ||||
B3 | DK GRN/WHT | 817 | ECT Sensor Signal | ||||
B4 | BLK | 550 | Ground | ||||
B5 | GRY | 1036 | IPC Class 2 Serial Data | ||||
B6-B8 | -- | -- | Not Used | ||||
B9 | ORN | 1140 | Battery Positive Voltage | ||||
B10 | BRN | 41 | Ignition 3 Voltage | ||||
B11 | TAN/WHT | 331 | Oil Pressure Sensor Signal | ||||
