Removal Procedure
- Remove the trim panel. Refer to
Door Trim Panel Replacement
.
- Use a sharp bladed tool in order to separate the water deflector
at the perforations. Refer to
Front Side Door Water Deflector Replacement
.
- Remove the power door
lock actuator in order to remove the remote lever rod.
- Disconnect the power door lock actuator wiring harness.
- Use a 6 mm (1/4 in) drill bit in order to remove
the actuator to door rivets.
- Remove the actuator from the door.
Installation Procedure
- Install the actuator to the door.
Important: Install new plastic retainer clips whenever the lock rods are removed.
- Install the actuator to door rivets.
- Connect the power door lock actuator wiring harness.
- Install the power door
lock actuator to the remote lever rod.
- Install the water deflector. Refer to
Front Side Door Water Deflector Replacement
.
- Install the trim panel. Refer to
Door Trim Panel Replacement
.