GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the trim panel. Refer to Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the lock control. Refer to Sliding Door Lock Replacement .
  4. Remove the lock rods from the handle (1).
  5. Remove the outside handle nuts (2).

  6. Object Number: 324174  Size: SH
  7. Remove the outside handle and gasket from the door.

Installation Procedure


    Object Number: 324174  Size: SH
  1. Install the outside handle and gasket to the door.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the outside handle nuts (2).
  4. Tighten
    Tighten the outside handle nuts to 6 N·m (50 lb in).

  5. Install the lock rods to the handle (1).
  6. Install the lock control. Refer to Sliding Door Lock Replacement .
  7. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  8. Install the trim panel. Refer to Door Trim Panel Replacement .