Removal Procedure
- Remove the rear door frame garnish molding. Refer to
Rear Upper Garnish Molding Replacement
in Interior
Trim.
- Remove the nut that retains
the locator to the door frame opening.
- Remove the locator from the vehicle.
- Remove the screws that retain the locator to the door.
- Remove the locator from the door.
Installation Procedure
- Install the locator to
the door.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws that retain the locator to the door.
Tighten
Tighten the screws that retain the locator to the door to 8 N·m
(71 lb in).
- Install the locator to the vehicle.
- Install the bolts that retain the locator to the vehicle.
Tighten
Tighten the bolts that retain the locator to the vehicle to 8 N·m
(71 lb in).
- Install the rear door frame garnish molding. Refer to
Rear Upper Garnish Molding Replacement
in Interior
Trim.