Rear Floor Mat/Carpet Replacement B31

1. Unsnap the seat belts from the second seat belt latches.
2. Remove the seats and the risers from the vehicle. Refer to Rear Bench Seat Replacement in Seats.
3. Remove the front and the rear door trim plates. Refer to Carpet Retainer Replacement .
4. Remove the body side front lower trim panel, if required. Refer to Body Side Front Lower Trim Panel Replacement .
5. Remove the bolt that retains each cargo net anchor to the floor of the vehicle, if equipped.




Important: The carpet bezels are retained by sonic weld and are not to be removed from the carpet.

6. Remove the carpet from the vehicle.

Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

1. Install the carpet into the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolt that retains each cargo net anchor to the floor of the vehicle, if equipped.

Tighten
Tighten the bolt to 2 N·m (18 lb in).

3. Install the body side front lower trim panel, if removed. Refer to Body Side Front Lower Trim Panel Replacement .
4. Install the front and the rear door trim plates. Refer to Carpet Retainer Replacement .
5. Install the seats and the risers. Refer to Rear Bench Seat Replacement in Seats.
6. Snap the seat belts to the second seat belt latches.

Rear Floor Mat/Carpet Replacement B38

1. Remove the seats and the risers. Refer to Rear Bench Seat Replacement in Seats.
2. Remove the front and the rear door trim plates. Refer to Carpet Retainer Replacement .
3. Remove the body side front lower trim panel, if required. Refer to Body Side Front Lower Trim Panel Replacement .
4. Remove the bolt that retains each cargo net anchor to the floor of the vehicle, if equipped.




Important: The carpet bezels are retained by sonic weld and are not to be removed.

5. Remove the carpet from the vehicle.

Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

1. Install the carpet into the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolt that retains each cargo net anchor to the floor of the vehicle, if equipped.

Tighten
Tighten the bolt to 2 N·m (18 lb in).

3. Install the body side front lower trim panel, if removed. Refer to Body Side Front Lower Trim Panel Replacement .
4. Install the front and the rear door trim plates. Refer to Carpet Retainer Replacement .
5. Install the seats and the risers. Refer to Bucket Seat Replacement in Seats.