For 1990-2009 cars only
Removal Procedure
- Disconnect the vacuum supply lines (3) from the cowl panel under the hood.
- Disconnect the vacuum supply lines (2) from the vacuum harness in the vehicle.
- Remove the vacuum supply lines harness and grommet (1) from the cowl panel by grasping the grommet at the base and pulling rearward.
- Remove the vacuum supply harness.
Installation Procedure
- Install the vacuum supply harness.
- Install the vacuum supply lines harness and grommet (1) to the corner of the cowl panel.
- Insert the vacuum supply lines harness and grommet to the cowl panel hole, push inward until fully seated.
- Connect the vacuum supply lines (2) to the vacuum harness.
- Connect the vacuum supply lines (3) to the cowl panel under the hood.
