GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 368519  Size: SH

    Important: Do not remove the instrument panel.

  1. Roll the instrument panel down. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages, and Console.
  2. Remove the screws that retain the duct.
  3. Remove the duct from the instrument panel.

Installation Procedure


    Object Number: 368519  Size: SH
  1. Install the duct to the instrument panel.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws in order to retain the duct.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Roll the instrument panel up. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages, and Console.