Removal Procedure
- Remove the instrument panel cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument
Panel, Gages, and Console.
- Squeeze the clip fasteners on the sides of the radio and pull
out.
- Disconnect the electrical and the antenna connectors.
- Remove the radio from
the vehicle.
Installation Procedure
- Install the radio to the vehicle.
- Connect the electrical and the antenna connectors.
- Align the mounting clips
with the slots in the instrument panel and slide into place.
- Install the instrument panel cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument
Panel, Gages, and Console.
- Verify component operation.