GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Safari - 4WD 🢒 Restraints 🢒 Seat Belts 🢒 Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure

    Object Number: 361846 Size: SH
  1. Remove the nuts located on the inside of the seat riser.
  2. Remove the seat belt buckle from the floor stud by lifting upward on the seat. The seat does not have to be removed from the vehicle.
  3. Disconnect the seat belt buckle warning lamp electrical connector.
  4. Remove the seat belt buckle.

Installation Procedure
  1. Install the seat belt buckle.
  2. Connect the seat belt buckle warning electrical connector.
  3. Install the seat belt buckle to the floor stud.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 361846 Size: SH
  4. Install the nuts located at the base of the seat riser.

    5. Tighten
    Tighten the bucket seat to the floor to 35 N·m (26 lb ft).