Removal Procedure
- Unsnap the seat belts from the second seat belt latches.
- Remove the seats from the vehicle. Refer to
Rear Bench Seat Replacement
in Seats.
- Remove the front and the rear door trim plates. Refer to
Carpet Retainer Replacement
.
- Remove the body side front lower trim panel, if required. Refer to
Body Side Front Lower Trim Panel Replacement
.
- Remove the bolt that retains each cargo net anchor to the floor of the
vehicle, if equipped.
Important: The carpet bezels are retained by sonic weld and are not to be removed from
the carpet.
- Remove the carpet from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.
- Install the carpet into the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolt that retains each cargo net anchor to the floor of the vehicle,
if equipped.
Tighten
Tighten the bolt to 2 N·m (18 lb in).
- Install the body side front lower trim panel, if removed. Refer to
Body Side Front Lower Trim Panel Replacement
.
- Install the front and the rear door trim plates. Refer to
Carpet Retainer Replacement
.
- Install the seats to the vehicle. Refer to
Rear Bench Seat Replacement
in Seats.
- Snap the seat belts to the second seat belt latches.