GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Safari - 4WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Parking and Turn Signal Lamp Replacement

Removal Procedure

    Object Number: 296125 Size: SH
  1. Turn OFF the headlamp switch.
  2. Remove the mounting screws.
  3. Remove the park/turn signal lamp from the vehicle.
  4. Remove the lamp sockets from the park/turn signal lamp housing.
  5. Remove the bulbs from the lamp sockets.

Installation Procedure

    Object Number: 296125 Size: SH
  1. Install the bulbs into the lamp sockets.
  2. Install the lamp socket to the park/turn signal lamp housing.
  3. Install the park/turn signal lamp to the vehicle.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the mounting screws.

    5. Tighten
    Tighten the mounting screws to 1.4 N·m (12 lb in).