GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 296154  Size: SH
  1. Gently push the lens or reflector toward the front edge of the door.
  2. Gently pry the rear of the lens or reflector away from the door by using a small flat bladed tool.
  3. Pivot the lens or reflector from the door in order to clear the retaining tab at the front edge.
  4. Remove the bulb. (if equipped).
  5. Remove the lens or reflector from the vehicle.

Installation Procedure


    Object Number: 296154  Size: SH
  1. Install the new bulb (If required).
  2. Install the lens or reflector to the vehicle.
  3. Insert the front tab of the lens or reflector into the slot in the door panel.
  4. Pivot the lens or reflector into the door panel.
  5. Press the lens or reflector at the rear until the lens or reflector snaps into the door panel.