Rotate the steering wheel so the side of the SIR module is at the 12 o'clock
position.
Insert a screwdriver into
the holes on the back of the steering wheel.
Pull the screwdriver handle
away from the steering column in order to release the leaf spring from the
notched pin.
Repeat steps 1-4 for the other attached locations.
Tilt the inflator module rearward to gain access to the electrical
connection.
Disconnect the electrical connector from the inflator module.
Caution: When you are carrying an undeployed inflator module:
•
Do not carry the inflator module by the wires or connector on
the inflator module
•
Make sure the bag opening points away from you
When you are storing an undeployed inflator module, make sure the bag
opening points away from the surface on which the inflator module rests.
When you are storing a steering column, do not rest the column with the bag
opening facing down and the column vertical. Provide free space for the
air bag to expand in case of an accidental deployment. Otherwise, personal
injury may result.
Remove the inflatable restraint module from the steering wheel.
Install the inflatable
restraint module to the steering wheel.
Install the electrical
connector.
Ensure that the wiring is not exposed or trapped between the inflatable
restraint steering wheel module and the steering wheel.
Place the inflator module onto the steering wheel and press the
module into the retaining tabs until the module is secured properly in all
4 retaining locations.
Rotate the steering wheel back into the straight position.