Disassembly Procedure
- Remove the upper and lower shrouds. Refer to
Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle
.
- Remove the wire harness
straps (2) from the wire harness assembly (1) and the steering
column.
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly out of the bulkhead connector (1).
- Remove the 2 pan
head tapping screws (1) from the turn signal and multifunction switch
assembly (2).
- Remove the turn signal and multifunction switch assembly (2)
from the steering column tilt head assembly.