GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Savana 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Steering Column Tilt Head Housing - Assemble - Off Vehicle

Assembly Procedure

Tools Required

    • J 23653-SIR Lock Plate Compressor
    • J 42137 Lock Plate Compressor Adapter

    Object Number: 330130 Size: SH
  1. Lubricate the following parts with synthetic grease.
    2. • The inner race (1).
    • The lower brass surface of the turn signal cancel cam assembly (4).
  2. Install the following parts onto the steering shaft assembly.
    3. 2.1. The inner race (1).
    2.2. The upper bearing inner race seat (2).
    2.3. The upper bearing spring (3).
    2.4. The turn signal cancel cam assembly (4).
    2.5. The shaft lock shield assembly (5).

    Object Number: 330127 Size: SH
  3. Compress the shaft lock shield assembly (2) using J 23653-SIR and J 42137 .
  4. Install the new bearing retainer (1) onto the steering shaft assembly.
  5. Firmly seat the bearing retainer (1) into the groove on the steering shaft assembly.
  6. Remove J 23653-SIR and J 42137 from the steering shaft assembly.
  7. Install the inflatable restraint steering wheel module coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle .