Removal Procedure
- Remove the right side
rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the lock rods (4) from the lock (1).
- Remove the electrical connector from the lock (1).
- Remove the screws (2) that retain the lock (1) to the right side
rear door.
- Remove the lock (1) from the right side rear door.
- Remove the lock (1) from the vehicle.
Installation Procedure
- Install the lock (1) to
the vehicle.
- Install the lock (1) to the right side rear door.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the screws
(2) in order to retain the lock (1) to the right side rear door.
Tighten
Tighten the retaining screws to 10 N·m (89 lb in).
- Install the electrical connector to the lock (1).
- Install the lock rods (4) to the lock (1).
- Install the right side rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.