GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Hinged Rear Window Replacement

Removal Procedure
  1. Remove the rear door trim panel. Refer to Rear Door Trim Panel Replacement in Doors.

    2. Object Number: 326818 Size: SH
  2. Remove the screws (1) that retain the latch to the door.
  3. Remove the screws that retain the hinge (3) to the door.
  4. Remove the window assembly from the vehicle.

Installation Procedure
  1. Install the window assembly to the vehicle.

    2. Object Number: 326818 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws that retain the hinge (3) to the door.

    3. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  3. Install the screws (1) that retain the latch to the door.

    4. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  4. Install the rear door trim panel. Refer to Rear Door Trim Panel Replacement in Doors.