GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 334095  Size: SH
  1. Remove the left side rear door trim panel. Refer to Rear Door Trim Panel Replacement .
  2. Remove the lock rod (3) from the left side rear door upper latch (2).
  3. Remove the bolt (1) that retains the left side rear door upper latch (2) to the door.
  4. Remove the left side rear door upper latch (2) from the door.

Installation Procedure


    Object Number: 334095  Size: SH
  1. Install the left side rear door upper latch (2) to the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolt (1) in order to retain the left side rear door upper latch (2) to the door.
  4. Tighten
    Tighten the retaining bolt to 25 N·m (18 lb ft).

  5. Install the lock rod (3) to the left side rear door upper latch (2).
  6. Install the left side read door trim panel. Refer to Rear Door Trim Panel Replacement .