For 1990-2009 cars only
Inspection Procedure
- Remove the drive belt. Refer to Drive Belt Replacement .
- Position a hex-head socket on the belt tensioner pulley bolt head.
- Move the drive belt tensioner through it's full travel.
- If any binding is observed, replace the tensioner. Refer to Drive Belt Tensioner Replacement .
- Install the drive belt. Refer to Drive Belt Replacement .
Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
| • | The movement should feel smooth. |
| • | There should be no binding. |
| • | The tensioner should return freely. |
Important: Movement of the Drive Belt Tensioner while the engine is operating is a normal operating condition. Do not replace the Drive Belt Tensioner for this normal condition.
