Parking Brake Cable Replacement Front Cables

1. Complete the parking brake lever pin up procedure. Refer to Parking Brake Cable Adjuster Enabling in Park Brake.



2. Loosen the parking brake cable at the cable adjuster.



3. Disconnect the front parking brake cable from the rear parking brake cables.



4. Remove the parking brake release handle and the cable from the vehicle. Refer to Parking Brake Release Handle Assembly Replacement in Park Brake.



5. Disconnect the front parking brake cable from the parking brake lever.



6. Disconnect the front parking brake cable from the parking brake lever retainer.



7. Remove the rubber grommet from the cowl.
8. Remove the front parking brake cable from the vehicle.

1. Install the front parking brake cable through the vehicle.



2. Connect the rubber grommet into the cowl.



3. Connect the front parking brake cable to the parking brake lever retainer.



4. Connect the front parking brake cable to the parking brake lever.



5. Install the parking brake release handle and the cable. Refer to Parking Brake Release Handle Assembly Replacement in Park Brake.



6. Connect the front parking brake cable to the rear parking brake cables.
7. Remove the pin from the parking brake lever.
8. Move the parking brake lever to the FULL up position.



9. Measure the threads on the equalizer. Adjust the threads to the following specifications:

•	Passenger/Cargo to 13 mm (0.511 in)

•	Cutaway/Upfitters to 21 mm (0.826 in)

10. Verify that the vehicle will hold position with the brake lever depressed.
11. If additional adjustments need to be made, refer to Park Brake Cable Service/Adjustment in Park Brake.

Parking Brake Cable Replacement Rear Cables

1. Complete the parking brake lever pin up procedure. Refer to Parking Brake Cable Adjuster Enabling in Park Brake.



2. Loosen the parking brake cable at the cable adjuster).
3. Disconnect the front parking brake cable from the rear parking brake cables.
4. Remove the rear brake shoes from the backing plate.
5. Disconnect the rear parking brake cable from the backing plate retainer.



6. Remove the rear parking brake cable from the vehicle.

1. Install the rear parking brake cable to the vehicle.
2. Connect the rear parking brake cable to the backing plate retainer.
3. Connect the rear brake shoes to the backing plate.



4. Connect the front parking brake cable to the rear parking brake cables.



5. Remove the pin (1) from the parking brake lever.
6. Place the parking brake lever to the FULL up position.



7. Measure the threads of the equalizer. Adjust the threads to the following specifications:

•	Passenger/Cargo to 13 mm (0.511 in)

•	Cutaway/Upfitters to 21 mm (0.826 in)

8. Verify that the vehicle will hold the position with the brake lever depressed.
9. If additional adjustments need to be made, refer to Park Brake Cable Service/Adjustment in Park Brake.