GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Brakes 🢒 Antilock Brake System 🢒 High Beam Indicator Inoperative

High Beam Indicator Inoperative Domestic

Step

Action

Value(s)

Yes

No

1

Was the Headlight System Check performed?

--

Go to Step 2

Go to Headlight System Check

2
  1. Place the headlamp switch in the headlamp position.
  2. Ensure that the headlamps light.
  3. Select high beam.
  4. Disconnect the connector at the instrument cluster.
  5. Connect a unpowered test lamp between the instrument cluster connector, cavity B3 for CKT 11 (LT GRN), and ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

3

Repair the open in CKT 11 (LT GRN) between the instrument cluster and splice S234.

Is the high beam indicator operative?

--

Go to Headlight System Check

Go to Step 4

4

Connect a J 39200 DMM between the instrument cluster connector, cavity B1 for CKT 150 (BLK), and ground.

Is continuity present?

--

Go to Step 5

Go to Step 8

5

Is the filament of the high beam indicator lamp open?

--

Go to Step 6

Go to Step 7

6

Replace the high beam indicator lamp.

Is the high beam indicator operative?

--

Go to Headlight System Check

Go to Step 7

7

Replace the instrument cluster.

Is the high beam indicator operative?

--

Go to Headlight System Check

Go to Step 8

8

Repair the open in CKT 150 (BLK) between ground G201 and the instrument cluster.

Is the high beam indicator operative?

--

Go to Headlight System Check

--

High Beam Indicator Inoperative Export

Step

Action

Value(s)

Yes

No

1

Was the Headlight System Check performed?

--

Go to Step 2

Go to Headlight System Check

2
  1. Place the headlamp switch in the headlamp position.
  2. Observe that the headlamps are on.
  3. Operate the headlamp dimmer switch in order to select high beam.
  4. Disconnect the connector at the instrument cluster.
  5. Connect an unpowered test lamp between cluster connector cavity B3 for the LT GRN (11) wire and ground.

Did the test lamp light?

--

Go to Step 3

Go to Step 4

3

Connect a J 39200 DMM between instrument cluster connector cavity B1 for the BLK (150) wire and ground.

Is continuity present?

--

Go to Step 5

Go to Step 6

4

Repair the open in the LT GRN (11) wire between splice S234 and the instrument cluster.

Is the repair complete?

--

Go to Headlight System Check

--

5

Is the high beam indicator bulb functional?

--

Go to Step 7

Go to Step 8

6

Repair the open in the BLK (150) wire between the instrument cluster and ground G201.

Is the repair complete?

--

Go to Headlight System Check

--

7

Replace the instrument cluster.

Is the repair complete?

--

Go to Headlight System Check

--

8

Replace the high beam indicator bulb.

Is the repair complete?

--

Go to Headlight System Check

--