- Remove the upper and lower trim covers. Refer to
Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle
.
- Remove the wire harness
assembly (1) from the wire harness strap (2).
- Remove and dispose of the small wire harness straps from the wire
harness assembly (1).
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly out of the bulkhead connector (1).
- Remove the 2 pan
head tapping screws (1) from the turn signal and multifunction switch
assembly (2).
- Remove the turn signal and multifunction switch assembly (2)
from the steering column housing assembly.