GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Hazard Lamps Inoperative

Hazard Lamps Inoperative Domestic

Step

Action

Value(s)

Yes

No

1

Was the Exterior Lights System Check performed?

--

Go to Step 2

Go to Exterior Lights System Check

2
  1. Disconnect connector C200 at the steering column.
  2. Connect an unpowered test lamp between connector C200, pin E8 for CKT 1040 (ORN), and ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

3

Repair the open in CKT 1040 (ORN) between the instrument panel fuse block and connector C200.

Are the hazard lamps operative?

--

Go to Exterior Lights System Check

Go to Step 4

4
  1. Connect a J 39200 DMM between connector C200, cavity E8 for the pigtail wire of CKT 140 (ORN), and cavity E1 for the pigtail wire of CKT 62 (LT GRN).
  2. Place the hazard warning switch in the down position.

Is continuity present?

--

Go to Step 7

Go to Step 5

5
  1. Locate the open in the pigtail wire of CKT 140 (ORN) or in the pigtail wire of CKT 62 (LT GRN) in the steering column.
  2. Repair the open, as necessary.

Are the hazard lamps operative?

--

Go to Exterior Lights System Check

Go to Step 6

6

Replace the hazard warning switch.

Are the hazard lamps operative?

--

Go to Exterior Lights System Check

Go to Step 8

7

Connect a J 39200 DMM between connector C200, cavity E9 for the pigtail wire of CKT 16 (PPL), and cavity A6 for the pigtail wire of CKT 15 (DK BLU).

Is continuity present?

--

Go to Step 8

Go to Step 6

8
  1. Disconnect the connector at the turn/hazard lamp flasher.
  2. Connect a J 39200 DMM between connector C200, pin E1, and the turn/hazard flasher connector, cavity B8, for CKT 62 (LT GRN).

Is continuity present?

--

Go to Step 10

Go to Step 9

9

Repair the open in CKT 62 (LT GRN) between the connector C200 and the turn/hazard lamp flasher.

Are the hazard lamps operative?

--

Go to Exterior Lights System Check

Go to Step 10

10

Connect a J 39200 DMM between the turn/hazard lamp flasher connector, cavity C8 for CKT 150 (BLK), and ground.

Is continuity present?

--

Go to Step 11

Go to Step 12

11

Replace the turn/hazard lamp flasher.

Are the hazard lamps operative?

--

Go to Exterior Lights System Check

Go to Step 12

12

Repair the open in CKT 150 (BLK) between the turn/hazard lamp flasher and ground G201.

Are the hazard lamps operative?

--

Go to Exterior Lights System Check

--

Hazard Lamps Inoperative Export

Step

Action

Value(s)

Yes

No

1

Was the Exterior Lights System Check performed?

--

Go to Step 2

Go to Exterior Lights System Check

2
  1. Disconnect connector C200 at the steering column.
  2. Connect an unpowered test lamp between connector C200 pin E8 for CKT 1040 (ORN) and ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

3

Locate and repair the open in CKT 1040 (ORN) between the following components:

    • The IP fuse block
    • Connector C200

Is the repair complete?

--

Go to Exterior Lights System Check

--

4
  1. Connect a J 39200 DMM between the following components:
    2. • Connector C200 cavity E8 for CKT 140 (GRN) pigtail wire
    • Cavity E1 for CKT 1696 pigtail wire
  2. Depress the hazard warning switch to the down position.

Is continuity present?

--

Go to Step 6

Go to Step 5

5

Locate and repair the open one of the following components in the steering column:

    • CKT 140 pigtail wire
    • CKT 1696 pigtail wire

If neither wire is open, replace the hazard warning switch.

Is the repair complete?

--

Go to Exterior Lights System Check

--

6

Connect a J 39200 DMM between the following components:

  1. Connector C200 cavity E9 for CKT 1697 (PPL) pigtail wire
  2. Connector C200 cavity A6 for CKT 15 (DK BLU) pigtail wire

Is continuity present?

--

Go to Step 8

Go to Step 7

7

Replace the hazard warning switch.

Is the repair complete?

--

Go to Exterior Lights System Check

--

8
  1. Disconnect the connector at the turn/hazard lamp flasher.
  2. Connect a J 39200 DMM between the following components for CKT 1508 (LT BLU):
    3. • Connector C200 pin E1
    • The turn/hazard lamp flasher connector cavity B9

Is continuity present?

--

Go to Step 10

Go to Step 9

9

Locate and repair the open in CKT 1508 (LT BLU) between the following components:

    • Connector C200
    • Splice S251

Is the repair complete?

--

Go to Exterior Lights System Check

--

10

Connect a J 39200 DMM between the turn/hazard lamp flasher connector cavity C8 for CKT 150 (BLK) and ground.

Is continuity present?

--

Go to Step 11

Go to Step 12

11

Replace the turn/hazard lamp flasher.

Is the repair complete?

--

Go to Exterior Lights System Check

--

12

Locate and repair the open in CKT 150 (BLK) between the turn/hazard lamp flasher and ground G201.

Is the repair complete?

--

Go to Exterior Lights System Check

--