Was the Interior Lamps System Check performed?

--

Go to Step 2

Go to Interior Lamps System Check

1. Remove the bulb from the right stepwell lamp.
2. Connect an unpowered test lamp between the right stepwell lamp connector, cavity A for CKT 40 (ORN), and ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

Repair the open in CKT 40 (ORN) between the right stepwell lamp connector and splice S309 (base) or splice S232 (upfitter provisions).

Is the right stepwell lamp operative?

--

Go to Interior Lamps System Check

Go to Step 4

1. Connect a J 39200 DMM between the right stepwell lamp connector, cavity B for CKT 156 (WHT), and ground.
2. Place the instrument panel dimmer switch in the dome switch position.

Is continuity present?

--

Go to Step 5

Go to Step 6

Replace the right stepwell lamp bulb.

Is the right stepwell lamp operative?

--

Go to Interior Lamps System Check

Go to Step 6

Repair the open in CKT 156 (WHT) between splice S305 (base) or splice S230 (upfitter provisions) and the right stepwell lamp connector.

Is the right stepwell lamp operative?

--

Go to Interior Lamps System Check

--