Removal Procedure

1. Remove the instrument panel lower extension upper trim panel. Refer to Instrument Panel Extension Trim Plate Replacement .



2. Remove the bolts that retain the instrument panel passenger knee bolster to the knee bolster brackets.
3. Pull on the instrument panel passenger knee bolster in order to disengage the retainers.
4. Remove the instrument panel passenger knee bolster from the vehicle.
5. Inspect the instrument panel passenger knee bolster for broken or missing retainers.

Replace the retainers as needed.

1. Position the instrument panel passenger knee bolster to the vehicle.
2. Push on the instrument panel passenger knee bolster in order to engage the retainers.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the bolts that retain the instrument panel knee bolster to the knee bolster brackets.

Tighten
Tighten the bolts to 4 N·m (35 lb in).

4. Install the instrument panel lower extension upper trim panel. Refer to Instrument Panel Extension Trim Plate Replacement .