Step
| Action
| Value(s)
| Yes
| No
|
1
| Has the Remote Keyless Entry System Check been performed?
| --
| Go to
Step 2
| Go to
Remote Keyless Entry System Check
|
2
|
- Disconnect the remote control door lock receiver.
- Connect an unpowered test lamp between remote control door lock
receiver connector cavity R for CKT 195 (LT BLU) and
a known good ground.
- Lock all doors from any power door lock switch.
Did the test lamp light?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Reprogram a known good transmitter. Refer to
Transmitter Programming
.
- Attempt to operate the keyless entry system.
Does the good transmitter work?
| --
| Go to
Step 5
| Go to
Step 6
|
4
| Repair the open in CKT 195 (LT BLU) between S241 and the
remote control door lock receiver connector cavity R.
Does the receiver operate properly?
| --
| Go to
Remote Keyless Entry System Check
| --
|
5
| Replace the old transmitter(s).
Is the repair complete?
| --
| Go to
Remote Keyless Entry System Check
| --
|
6
|
- Replace the remote control door lock receiver.
- Program or reprogram the transmitters. Refer to
Transmitter Programming
.
Is the repair complete?
| --
| Go to
Remote Keyless Entry System Check
| --
|
