Has the Remote Keyless Entry System Check been performed?

--

Go to Step 2

Go to Remote Keyless Entry System Check

1. Disconnect the remote control door lock receiver.
2. Connect an unpowered test lamp between remote control door lock receiver connector cavity B for CKT 194 (WHT) and ground.
3. Unlock all doors from any power door lock switch.

Did the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the remote control door lock receiver.

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--

Repair the open in CKT 194 (WHT) between splice S242 and the remote control door lock remover.

Is the repair complete?

--

Go to Remote Keyless Entry System Check

--