GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Savana 🢒 Body and Accessories 🢒 Cruise Control 🢒 Cruise Control Cable Replacement

Removal Procedure
  1. Remove the engine cover from the vehicle. Refer to Engine Cover Replacement in Interior Trim.

    2. Object Number: 332349 Size: SH
  2. Pull the cruise control cable (2) from the throttle lever pin (3).
  3. Squeeze the retaining tabs on the cruise control cable in order to release the cable from the bracket.
  4. Remove the cruise control cable (2) from the bracket (1) on the engine.
  5. Remove the air cleaner assembly from the vehicle. For the 4.3L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 5.0/5.7L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 6.5L diesel engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 7.4L engine, refer to Air Cleaner Assembly Replacement in Engine Controls.
  6. Remove the cruise control cable from the retaining clip on the fan shroud.
  7. Remove the nuts that retain the cruise control module bracket to the cowl.
  8. Remove the cruise control module and the bracket assembly away from the studs on the cowl.

    9. Object Number: 332348 Size: SH
  9. Disconnect the cruise control cable (4) from the cruise control module (2).
  10. Remove the cruise control cable bead (3) from the buckle at the end of the ribbon (1) on the cruise control module.
  11. Remove the cruise control cable (4) from the vehicle.

Installation Procedure

    Object Number: 332348 Size: SH
  1. Install the cruise control cable (4) to the vehicle.
  2. Connect the cruise control cable bead (3) to the buckle at the end of the ribbon (1) on the cruise control module.
  3. Connect the cruise control cable (4) to the cruise control module (2).

    4. Object Number: 332349 Size: SH
  4. Route the cruise control cable (2) from the cruise control module to the throttle lever (4).
  5. Install the cruise control module and bracket assembly to the studs on the cowl.

    6. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the nuts that retain the cruise control bracket to the cowl.

    7. Tighten
    Tighten the nuts to 5 N·m (44 lb in).

  7. Install the cruise control cable to the retaining clip on the fan shroud.
  8. Connect the cruise control cable (2) to the bracket (1) on the engine.
  9. Push the cruise control cable (2) into the bracket (1) in order to engage the retaining tabs on the cruise control cable with the bracket.
  10. Connect the cruise control cable (2) to the throttle lever pin (3) by pushing the retainer on the end of the cruise control cable onto the throttle lever pin.
  11. Install the engine cover from the vehicle. Refer to Engine Cover Replacement in Interior Trim.
  12. Install the air cleaner assembly to the vehicle. For the 4.3L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 5.0/5.7L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 6.5L diesel engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 7.4L engine, refer to Air Cleaner Assembly Replacement in Engine Controls.