For 1990-2009 cars only
Removal Procedure
- Raise and support the hood.
- Remove the side marker lamp. Refer to Front Side Marker Lamp Replacement in Lighting Systems.
- Remove the park/turn signal lamp. Refer to Parking and Turn Signal Lamp Replacement in Lighting Systems.
- Remove the bolts (4) that retain the radiator grille (3) to the radiator support.
- Remove the retainers at the top of the radiator grille (3) from the radiator support.
- Lift the radiator grille (3) in order to remove the locating pins (5) on the bottom of the radiator grille (3) from the radiator support.
- Remove the radiator grille (3) from the vehicle.
Installation Procedure
- Install the radiator grille (3) to the vehicle.
- Align the locating pins (5) on the bottom of the radiator grille (3) with the pockets on the radiator support.
- Align the locating pin (2) and the retainers at the top of the radiator grille (3) with the slots in the radiator support.
- Install the bolts (4) that retain the radiator grille (3) to the radiator support.
- Install the park/turn signal lamp. Refer to Parking and Turn Signal Lamp Replacement in Lighting Systems.
- Install the side marker lamp. Refer to Front Side Marker Lamp Replacement in Lighting Systems.
- Close the hood.
Lower the radiator grille (3) into position.
Press the retainers into place.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 1 N·m (9 lb in).
