Throttle Body Installation without RPO 9C2

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the throttle body studs, if removed.

Tighten
Tighten the studs to 12 N·m (18 lb ft).

2. Install the throttle body gasket.



3. Install the throttle body onto the manifold.



4. Install the throttle body nuts.

Tighten
Tighten the nuts to 10 N·m (89 lb in).

Throttle Body Installation with RPO 9C2

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the throttle body studs, if removed.

Tighten
Tighten the studs to 12 N·m (18 lb ft).

2. Install the throttle body gasket.



3. Install the throttle body onto the manifold.



4. Install the throttle position bracket for the govener.



5. Align the slot in the throttle position bracket for the govener with the throttle body pin.



6. Ensure correct placement of the slot in the throttle position bracket for the govener with the pin on the throttle body.



7. Install the throttle body nuts.

Tighten
Tighten the nuts to 10 N·m (89 lb in).