Application | Specification | |
---|---|---|
Metric | English | |
Auxiliary Battery Hold Down Retaining Bolt | 18 N·m | 13 lb ft |
Auxiliary Battery Tray Retaining Bolts | 25 N·m | 18 lb ft |
Auxiliary Positive and Negative Battery Cable Retaining Bolts to the Battery | 15 N·m | 11 lb ft |
Auxiliary Generator Brace Mounting (Long) Bolts | 50 N·m | 37 lb ft |
Auxiliary Generator Brace Mounting (Short) Bolts | 25 N·m | 18 lb ft |
Auxiliary Generator Bracket Mounting Bolts (A/C Compressor) | 50 N·m | 37 lb ft |
Auxiliary Generator Bracket Mounting Bolt (Backside of the Generator) | 25 N·m | 18 lb ft |
Battery Limiter to Fender Panel Bolt | 25 N·m | 18 lb ft |
Battery Negative Cable Lead to Engine Block Bolt | 25 N·m | 18 lb ft |
Battery Negative Cable Lead to Inner Fender Well Bolt | 10 N·m | 89 lb in |
Battery Negative/ Positive Terminal Bolts | 17 N·m | 13 lb ft |
Camshaft Position Sensor Screws | 2 N·m | 18 lb in |
Distributor Cap Retaining Screws | 2.4 N·m | 21 lb in |
Distributor Clamp Bolt | 25 N·m | 18 lb ft |
Distributor Rotor Retaining Screws | 2 N·m | 18 lb in |
Front Battery Hold Down Retaining Bolt | 18 N·m | 13 lb ft |
Front Battery Tray Retaining Bolts | 25 N·m | 18 lb ft |
Generator Brace to the Generator Bracket Retaining Bolts | 50 N·m | 37 lb ft |
Generator Bracket Mounting Bolts and Nuts (4.3L, 5.0L and 5.7L) | 41 N·m | 30 lb ft |
Generator Bracket Mounting Bolts and Nuts (7.4L) | 66 N·m | 49 lb ft |
Generator Bracket Mounting Bolts and Nuts (6.5L Diesel) | 50 N·m | 37 lb ft |
Generator Front Mounting Bolts | 50 N·m | 37 lb ft |
Generator Output (Bat) Terminal Nut | 18 N·m | 13 lb ft |
Generator Pulley Retaining Nut | 100 N·m | 74 lb ft |
Generator Rear Mounting Bolts | 25 N·m | 18 lb ft |
Ignition Coil Hold Down Studs | 11 N·m | 97 lb in |
Ignition Wire Harness to the Starter Motor Solenoid (Diesel Engines) | 6 N·m | 53 lb in |
Ignition Wire Harness to the Starter Motor Solenoid (Gas Engines) | 2 N·m | 18 lb in |
Oil Fill Tube Screws | 5 N·m | 44 lb in |
Oil Fill Tube Support Bracket Bolt | 25 N·m | 18 lb ft |
Positive Battery Cable Lead to Junction Block Retaining Nut | 8 N·m | 71 lb in |
Positive Battery Cable to the Starter Motor Solenoid (Diesel Engines) | 16 N·m | 12 lb ft |
Positive Battery Cable to the Starter Motor Solenoid (Gas Engines) | 10 N·m | 89 lb in |
Spark Plugs (New Cylinder Head) | 30 N·m | 22 lb ft |
Spark Plugs 4.3L, 5.0L and 5.7L (Used Cylinder Head) | 15 N·m | 11 lb ft |
Spark Plugs 7.4L (Used Cylinder Head) | 20 N·m | 15 lb ft |
Starter Motor Bracket Bolt to the Engine (Diesel Engines) | 17 N·m | 13 lb ft |
Starter Motor Retaining Bolts to the Engine | 45 N·m | 33 lb ft |
Starter Motor Heat Shield Retaining Bolts | 3 N·m | 27 lb in |
Starter Motor Heat Shield Retaining Nuts | 6 N·m | 53 lb in |
Starter Motor Retaining Nut to the Engine Bracket (Diesel Engines) | 10 N·m | 89 lb in |
Starter Motor Field Lead Retaining Nut | 11 N·m | 97 lb in |
Starter Motor Solenoid Clamp Retaining Screws | 11 N·m | 97 lb in |
Starter Motor Solenoid Retaining Bolts | 9 N·m | 80 lb in |
Starter Motor Brush Plate Retaining Screws 28 MT | 3 N·m | 27 lb in |
Starter Motor Drive Housing Retaining Bolts 28 MT | 9 N·m | 80 lb in |
Starter Motor Grounded Brush Retaining Screws 28 MT | 2 N·m | 18 lb in |
Starter Motor Insulated Brush Retaining Screws 28MT | 2 N·m | 18 lb in |
Starter Motor Shift Lever Retaining Nut 28 MT | 5 N·m | 44 lb in |