For 1990-2009 cars only
Inspection Procedure
- Remove the drive belt. Refer to Drive Belt Replacement .
- Position a hex-head socket on the drive belt tensioner pulley bolt head.
- Move the drive belt tensioner through the full travel.
- If any binding is observed, replace the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
- Install the drive belt. Refer to Drive Belt Replacement .
Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
| • | The movement should feel smooth |
| • | There should not be binding |
| • | The drive belt tensioner should return freely |
Important: Movement of the drive belt tensioner while the engine is operating is a normal operating condition. Do not replace the drive belt tensioner for this normal condition.
