Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the vacuum line (1) from the shut-off valve.
- Disconnect the inlet (3) and outlet (2) hoses from the shut-off valve by releasing the spring clamps.
- Remove the shut off valve (3) from the vehicle.
Installation Procedure
- Connect the inlet (3) and outlet (2) hoses to the shut-off valve by installing the spring
clamps.
- Install the vacuum line (1) to the shut-off valve.
- Lower the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.