GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 Savana 🢒 Engine 🢒 Engine Electrical 🢒 Engine Flywheel Replacement

Removal Procedure

    Object Number: 64554 Size: SH
  1. Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the engine cover from the vehicle. Refer to Engine Cover Replacement in Interior Trim.
  3. Remove the transmission from the vehicle. Refer to Transmission Replacement or Transmission Replacement in Transmission/Transaxle.
  4. Remove the flywheel bolts from the crankshaft.
  5. Remove the flywheel from the crankshaft.

Installation Procedure
  1. Install the flywheel to the crankshaft.

    2. Object Number: 64554 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the flywheel bolts.

    3. Tighten
    Tighten the bolts to 90 N·m (65 lb ft).

  3. Install the transmission in the vehicle. Refer to Transmission Replacement or Transmission Replacement in Transmission/Transaxle.
  4. Install the engine cover in the vehicle. Refer to Engine Cover Replacement in Interior Trim.
  5. Connect the battery negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.