Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the cigar lighter/auxiliary outlet circuit description and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Depress the cigar lighter into the dash panel. Does the cigar lighter element heat up and release? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 5 |
4 | Connect a digital multimeter (DMM between the cigarette lighter connector, cavity B for CKT 150 (BLK), and ground. Refer to Circuit Testing in Wiring Systems. Is continuity present? | -- | Go to Step 7 | Go to Step 6 |
5 | Repair the open in CKT 640 (ORN) between the IP fuse block and the cigarette lighter. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | Go to Step 3 |
6 | Repair the open in CKT 150 (BLK) between the cigarette lighter and ground G201. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | Go to Step 3 |
7 | Replace the cigarette lighter. Is the repair complete? | -- | Go to Step 8 | Go to Step 3 |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
