Tools Required

J 25254-10 A Oil Pressure Sensor Socket.

1. Remove the Engine Cover. Refer to Engine Cover Replacement in Interior Trim.



2. Disconnect the electrical connector.
3. Remove the oil pressure sensor using J 25254-10 A .

1. Install the oil pressure sensor.
2. Hold the oil pressure sensor fitting with a wrench to prevent from turning.

Tighten
Using J 25254-10 A , tighten the oil pressure sensor to 30N·m  (22 lb ft).

3. Install the electrical connector.
4. Install the Engine Cover. Refer to Engine Cover Replacement in Interior Trim.