Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The fasten safety belt chime does not sound when the driver's seat belt is unbuckled and the ignition switch is turned to RUN. | ||||
1 | Did you review the Audible Warning circuit description and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the fasten safety belt chime sound? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Is continuity present? | -- | Go to Step 4 | Go to Step 8 |
4 | Connect a J 39200 DMM between seat belt switch connector cavity B for CKT 150 (BLK) and ground. Refer to Circuit Testing in Wiring Systems. Is continuity present? | -- | Go to Step 5 | Go to Step 6 |
5 |
Is continuity present? | -- | Go to Step 9 | Go to Step 7 |
6 | Repair the open in CKT 150 (BLK) between the seat belt switch and splice S201. Refer to Wiring Repairs in Wiring Systems. Is the fasten safety belt chime operative? | -- | Go to Step 10 | Go to Step 3 |
7 | Repair the open in CKT 238 (BLK/WHT) between the multi-function alarm module and the seat belt switch. Refer to Wiring Repairs in Wiring Systems. Is the fasten safety belt chime operative? | -- | Go to Step 10 | Go to Step 3 |
8 | Replace the seat belt switch. Refer to Front Seat Belt Buckle Replacement in Seat Belts. Is the fasten safety belt chime operative? | -- | Go to Step 10 | Go to Step 3 |
9 | Replace the multi-function alarm module. Refer to Multifunction Alarm Module Replacement . Is the fasten safety belt chime operative? | -- | Go to Step 10 | Go to Step 3 |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
