DEFINITION: The audible alarm does not sound when the park lamps or head lamps are ON and the ignition switch is not in RUN.

Did you review the audible warning circuit description and perform the necessary inspections?

--

Go to Step 2

Go to Symptoms - Audible Warnings

1. Turn the park lamps ON.
2. Turn the ignition switch OFF.

Does the lights-on chime sound?

--

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

1. Adjust the instrument panel (IP) dimmer switch to maximum brightness.
2. Disconnect multi-function alarm module connector C1.
3. Connect a J 35616-200 unpowered test lamp between multi-function alarm module connector C1 cavity A1 for CKT 8 (GRY) and ground. Refer to Circuit Testing in Wiring Systems.
4. Place the headlamp switch in the park lamp position.

Does the test lamp light?

--

Go to Step 5

Go to Step 4

Locate and repair the open in CKT 8 (GRY) between the IP fuse block and the multi-function alarm module, or in CKT 44 (DK GRN) between the IP dimmer switch and the IP fuse block. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Step 6

Go to Step 3

Replace the multi-function alarm module. Refer to Multifunction Alarm Module Replacement .

Is the repair complete?

--

Go to Step 6

Go to Step 3

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3