Power Seat Switch Replacement All

1. Remove the screws that retain the power seat adjuster switch (5) to the seat cushion (1).
2. Remove the power seat adjuster switch from the seat cushion.
3. Disconnect the electrical connector from the power seat adjuster switch.
4. Remove the power seat adjuster switch from the vehicle.

1. Install the power seat adjuster switch (5) to the vehicle.
2. Connect the electrical connector to the power seat adjuster switch.
3. Install the power seat adjuster switch to the seat cushion (1).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the screws in order to retain the power seat adjuster switch to the seat cushion.

Tighten
Tighten the screws to 2 N·m (18 lb in).