Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement
Interior Trim.
- Relieve the fuel system
pressure. Refer to
Fuel Pressure Relief
.
- Use a standard valve core tool in order to remove the valve core
(2).
Installation Procedure
- Use a standard valve core
tool in order to install a new valve core (2).
- Tighten the fuel filler cap.
- Connect the negative battery cable.
- Inspect for leaks.
4.1. | Turn ON the ignition for 2 seconds. |
4.2. | Turn OFF the ignition for 10 seconds. |
4.3. | Turn ON the ignition for 2 seconds. |
4.4. | Inspect for fuel leaks. |
- Install the fuel pressure connection valve cap (3).
- Install the engine cover. Refer to
Engine Cover Replacement
Interior Trim.