Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement
in Interior Trim.
- Disconnect the spark plug
wire at each spark plug.
• | Twist each spark plug 1/2 turn. |
• | Pull only on the boot in order to remove the wire from each spark
plug. |
- Disconnect the spark plug wire from the ignition coil.
• | Twist each spark plug boot 1/2 turn. |
• | Pull only on the boot in order to remove the wires from the ignition
coil. |
Installation Procedure
- Install the spark plug
wires at the ignition coil.
- Install the spark plug wire to each spark plug.
- Inspect the wires for proper installation:
• | Push sideways on each boot in order to inspect the seating. |
• | Reinstall any loose boot. |
- Install the engine cover. Refer to
Engine Cover Replacement
in Interior Trim.