For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the fuel tank filler cap.
- Remove the protective cover from fuel manager/filter.
- Open the air bleed valve (4) on top of the fuel manager/filter (3) in order to release any of the pressure in the fuel supply system.
- Disconnect the fuel heater connector (1).
- Remove the fuel heater threaded nut by turning counter clock wise.
- Remove the fuel heater (2) from the filter housing by pulling straight up.
Use a hand pressure or a strap wrench in order to remove the fuel heater threaded nut.
Installation Procedure
- Install the cap seal into the filter housing.
- Install the fuel heater by pushing straight down (2).
- Install the fuel heater threaded nut.
- Reconnect fuel heater connector (1).
- Install the protective cover on the fuel manager/filter.
- Install the fuel tank filler cap.
- Bleed the air from the fuel manager/filter.
- Lower the vehicle.
