Tools Required
• | J 42137 Lock
Plate Compressor Adapter |
Important: Let the inflatable restraint steering wheel module coil assembly hang
freely after removal.
- Remove the inflatable restraint steering wheel module coil assembly.
Refer to
Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle
.
- Compress the shaft lock
shield assembly (2) using J 23653-SIR
andJ 42137
.
- Remove the bearing retainer (1) from the steering shaft
assembly.
- Discard the bearing retainer.
- Remove J 23653-SIR
andJ 42137
from
the steering shaft assembly.
- Remove the following parts
from the steering shaft assembly:
6.1. | The shaft lock shield assembly (4). |
6.2. | The turn signal cancel cam assembly (3). |
6.3. | The upper bearing spring (2). |
6.4. | The thrust washer (1). |