GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the body side rear trim panel. Refer to Body Side Rear Trim Panel Replacement .

  2. Object Number: 600368  Size: SH
  3. Pull upward to remove the blower motor relay (1) from the connector.
  4. Remove the blower motor relay (1) from the vehicle.

Installation Procedure

  1. Install the blower motor relay to the vehicle.

  2. Object Number: 600368  Size: SH
  3. Push downward to install the blower motor relay (1) to the connector.
  4. Make sure the relay is fully seated in the connector.

  5. Install the body side rear trim panel. Refer to Body Side Rear Trim Panel Replacement .