Removal Procedure
- Remove the passenger side knee bolster. Refer to
Passenger Knee Bolster Replacement
in Instrument Panel, Gages, and
Console.
- Disconnect the electrical connector from the air temperature actuator.
- Remove the air temperature
actuator retaining screws from the air temperature actuator (1).
- Remove the air temperature actuator (1) from the HVAC module (2).
Installation Procedure
- Install the air temperature
actuator (1) into the HVAC module (2).
- Install the air temperature actuator retaining screws to the air
temperature actuator (1).
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Connect the electrical connector to the air temperature actuator (1).
- Install the passenger side knee bolster. Refer to
Passenger Knee Bolster Replacement
in Instrument Panel, Gages, and
Console.