Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you review the stop lamp operation and perform the necessary inspections? | Go to Step 2 | |
2 | Press the brake pedal. Does the system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | Go to Step 3 |
3 | Disconnect the stop lamp switch. Do the stop lamps remain illuminated? | Go to Step 5 | Go to Step 4 |
4 | Inspect for poor connections at the harness connector of the stop lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | -- |
5 | Repair the stop lamp switch signal circuit. Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the stop lamp switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes. Did you complete the replacement? |
Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
